wireless
Displays wireless configuration
information and statistics
Supported on the following devices:
- Access Points:
AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632,
AP7662, AP8163, AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
Syntax
show wireless [ap|bridge|client|coverage-hole-incidents|location-server|meshpoint|mint|
ml-rrm|mobility-database|radio|regulatory|rf-domain|sensor-server|unsanctioned|wips|wlan]
show wireless ap {configured|detail|load-balancing|on <DEVICE-NAME>}
show wireless ap {configured}
show wireless ap {detail} {<MAC/HOST-NAME>} {(on <DEVICE-OR-DOMAIN-NAME>)}
show wireless ap {load-balancing} {client-capability|events|neighbors} {(on <DEVICE- NAME>)}
show wireless bridge {candidate-ap|certificate|config|hosts|on|statistics}
show wireless bridge {candidate-ap} {<MAC/HOSTNAME> {<1-3>}} {(filter radio-mac <RADIO-MAC>)}
{(on <DEVICE-OR-DOMAIN-NAME>)}
show wireless bridge {certificate} status {on <DEVICE-NAME>}
show wireless bridge {config}
show wireless bridge {hosts} {on <DEVICE-OR-DOMAIN-NAME>}
show wireless bridge {statistics} {rf|traffic} {(on <DEVICE-OR-DOMAIN-NAME>)}
show wireless client {association-history|detail|filter|include-ipv6|on <DEVICE-OR-DOMAIN-NAME>|
statistics|tspec}
show wireless client {association-history <MAC>} {on <DEVICE-OR-DOMAIN-NAME>}
show wireless client {detail <MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}
show wireless client {filter [ip|on|state|wlan]}
show wireless client {filter} {ip [<IP>|not <IP>]} {on <DEVICE-OR-DOMAIN-NAME>}
show wireless client {filter} {on <DEVICE-OR-DOMAIN-NAME>}
show wireless client {filter} {state [data-ready|not [data-ready|roaming]|roaming]} {on <DEVICE-OR-DOMAIN-NAME>}
show wireless client {filter} {wlan [<WLAN-NAME>|not <WLAN-NAME>]} {on <DEVICE-OR-DOMAIN-NAME>}
show wireless client {include-ipv6} {detail|on|filter}
show wireless client {include-ipv6} {detail <MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}
show wireless client {include-ipv6} {filter {ip|ipv6|state|wlan}}
show wireless client {statistics} {detail|on|rf|window-data}
show wireless client {statistics} {detail <MAC>|rf|window-data <MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}
show wireless client {tspec <MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}
show wireless coverage-hole-incidents [detail|on|summary]
show wireless coverage-hole-incidents detail {filter [ap <MAC/HOSTNAME>|client-mac <MAC>]|summary} {(on <DOMAIN-NAME>)}]
show wireless location-server {on <AP-NAME>}
show wireless meshpoint {config|detail|multicast|neighbor|on|path|proxy|root|security|
statistics|tree|usage-mappings}
show wireless meshpoint {config} {filter [device <DEVICE-NAME>|rf-domain <DOMAIN-NAME>]}
show wireless meshpoint {detail} {<MESHPOINT-NAME>}
show wireless meshpoint {on <DEVICE-OR-DOMAIN-NAME>}
show wireless meshpoint {multicast|path|proxy|root|security|statistics}
[<MESHPOINT-NAME>|detail] {on <DEVICE-OR-DOMAIN-NAME>}
show wireless meshpoint neighbor [<MESHPOINT-NAME>|detail|statistics {rf}]
{on <DEVICE-OR-DOMAIN-NAME>}
show wireless meshpoint {tree} {on <DEVICE-OR-DOMAIN-NAME>}
show wireless meshpoint {usage-mappings}
show wireless mobility-database {on <DEVICE-NAME>}
show wireless mint [client|detail|links|portal]
show wireless ml-rrm history
show wireless [client|detail] {on|portal-candidates {<DEVICE-NAME>|filter <RADIO-MAC>}|
statistics} (<DEVICE-OR-DOMAIN-NAME>)
show wireless mint links {on <DEVICE-OR-DOMAIN-NAME>}
show wireless mint portal statistics {on <DEVICE-OR-DOMAIN-NAME>}
show wireless radio {detail|on <DEVICE-OR-DOMAIN-NAME>|statistics|tspec|wlan-map}
show wireless radio {detail} {<DEVICE-NAME>|filter|on <DEVICE-OR-DOMAIN-NAME>}
show wireless radio {detail} {<DEVICE-NAME> {<1-3>|filter|on}}
show wireless radio {detail} {filter <RADIO-MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}
show wireless radio {statistics} {detail|on|rf|windows-data}
show wireless radio {statistics} {on <DEVICE-OR-DOMAIN-NAME>|rf {on <DEVICE-OR-DOMAIN-NAME>}}
show wireless radio {statistics} {detail|window-data} {<DEVICE-NAME>} {<1-3>|filter <RADIO-MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}
show wireless radio {tspec} {<DEVICE-NAME>|filter|on <DEVICE-OR-DOMAIN-NAME>|option}
show wireless radio {wlan-map} {on <DEVICE-OR-DOMAIN-NAME>}
show wireless regulatory [channel-info <WORD>|country-code <WORD>|device-type]
show wireless regulatory [channel-info <WORD>|country-code <WORD>|device-type]
show wireless regulatory device-type [ap505|ap510] <WORD>
show wireless rf-domain statistics {detail} {(on <DEVICE-OR-DOMAIN-NAME>)}
show wireless sensor-server {on <DEVICE-OR-DOMAIN-NAME>}
show wireless unsanctioned aps {detail|statistics} {(on <DEVICE-OR-DOMAIN-NAME>)}
show wireless wips [client-blacklist|event-history] {on <DEVICE-OR-DOMAIN-NAME>}
show wireless wlan {config|detail <WLAN>|on <DEVICE-OR-DOMAIN-NAME>|policy-mappings|statistics|usage-mappings}
show wireless wlan {detail <WLAN>|on <DEVICE-OR-DOMAIN-NAME>|policy-mappings|usage-mappings}
show wireless {config filter {device <DEVICE-NAME>|rf-domain <DOMAIN-NAME>}}
show wireless wlan statistics {<WLAN>|detail|traffic} {on <DEVICE-OR-DOMAIN-NAME>}
Parameters
show wireless ap {configured}
| wireless |
Displays wireless configuration parameters |
| ap |
Displays managed access point information |
| configured |
Optional. Displays configured AP information, such
as name, MAC address, profile, RF Domain and adoption
status. |
show wireless ap {detail} {<MAC/HOST-NAME>} {(on <DEVICE-OR-DOMAIN-NAME>)}
| wireless |
Displays wireless configuration parameters |
| ap |
Displays managed access point information |
| detail <MAC/HOST-NAME> |
Optional. Displays detailed information for all APs
or a specified AP
- <MAC/HOST-NAME> – Optional. Displays
information for a specified AP. Specify the AP‘s
MAC address.
|
| on <DEVICE-OR-DOMAIN-NAME>} |
The following keyword is recursive and common to the
‘detail <MAC/HOST-NAME>' parameters:
- on
<DEVICE-OR-DOMAIN-NAME> – Optional. Displays
information on a specified device or RF Domain
- <DEVICE-OR-DOMAIN-NAME> – Specify the
name of the AP, wireless controller, service
platform, or RF Domain.
|
show wireless ap {load-balancing} {client-capability|events|neighbors} {(on <DEVICE- NAME>)}
| wireless |
Displays wireless configuration parameters |
| ap |
Displays managed access point information |
| load-balancing {client-capability|
events|neighbors} |
Optional. Displays load balancing status. Use
additional filters to view specific details.
- client-capability – Optional. Displays client
band capability
- events – Optional. Displays client events
- neighbors – Optional. Displays neighboring
clients
|
| on <DEVICE-NAME> |
The following keyword is recursive and common to the
‘client-capability', ‘events', and ‘neighbors'
parameters:
- on
<DEVICE-NAME> – Optional. Displays load
balancing information, based on the parameters
passed, on a specified device
- <DEVICE-NAME> – Specify the name of
the AP, wireless controller, or service
platform.
|
show wireless bridge {candidate-ap} {<MAC/HOSTNAME> {<1-3>}} {(filter radio-mac <RADIO-MAC>)}
{(on <DEVICE-OR-DOMAIN-NAME>)}
| wireless |
Displays wireless configuration statistics |
| bridge candidate-ap |
Optional. Displays information about the candidate
infrastructure access points as well as the
infrastructure access point that the client-bridge radio
has selected. Note: When
enabled, the client-bridge radio scans its defined
channels to locate the best candidate access point
servicing the infrastructure WLAN.
|
| <MAC/HOSTNAME> <1-3> |
Optional. Specify the client-bridge access point‘s
hostname or MAC address. Optionally append the radio
interface‘s number to form client-bridge in the form of
AA-BB-CC-DD-EE-FF:RX or HOSTNAME:RX.
- <1-3> – Optional. Radio interface index if
not specified as part of mesh ID.
|
| filter radio-mac <RADIO-MAC> |
This is a recursive parameter and common to all of
the above options.
- filter radio-mac – Optional. Provides additional
filters to specifically identify the radio by its
MAC address
- <RADIO-MAC> – Specify the radio‘s MAC
address.
|
| on <DEVICE-OR-DOMAIN-NAME> |
This is a recursive parameter and common to all of
the above options.
- on
<DEVICE-OR-DOMAIN-NAME> – Optional. Executes
the command on a specified device or devices
within a specified RF Domain
- <DEVICE-OR-DOMAIN-NAME> – Specify the
AP, controller, service platform, or RF
Domain name.
|
show wireless bridge {certificate} status {on <DEVICE-NAME>}
| wireless |
Displays wireless configuration statistics |
| bridge certificate status |
Optional. Displays all client bridges in
configuration and the status of their PKCS#12
certificates |
| on <DEVICE-NAME> |
Optional. Executes the command on a specified device
- <DEVICE-NAME> – Specify the AP, controller,
service platform name.
|
show wireless bridge {config}
| wireless |
Displays wireless configuration statistics |
| bridge config |
Optional. Displays all client bridges in
configuration The output displays the configured
client-bridges‘ hostname, MAC address, profile, RF
Domain, SSID, band, encryption, authentication, and
EAP username.
|
show wireless bridge {hosts} {on <DEVICE-OR-DOMAIN-NAME>}
| wireless |
Displays wireless configuration statistics |
| bridge hosts |
Optional. Displays the client bridge host
information The output displays the configured
client-bridges‘ host‘s MAC Address, bridge MAC
address, IPv4 address, bridging status, and
activity.
Note: The
HOST MAC column displays real MAC addresses of wired
hosts, while the BRIDGE MAC column displays the
translated MAC addresses. The BRIDGE MAC column is
based on the radio 2 base MAC address and increments
by 1 for each wired host connected to the client
bridges Ge1 port.
|
| on <DEVICE-OR-DOMAIN-NAME> |
Optional. Executes the command on a specified device
or devices within a specified RF Domain.
- <DEVICE-OR-DOMAIN-NAME> – Optional. Specify
the AP, controller, service platform, or Domain
name.
|
show wireless bridge {statistics} {rf|traffic} {(on <DEVICE-OR-DOMAIN-NAME>)}
| wireless |
Displays wireless configuration statistics |
| bridge statistics |
Optional. Displays the client-bridge related
statistics |
| rf |
Optional. Displays the client-bridge related RF
statistics The output displays the signal, noise,
SNR, TX/RX rates, retries, and errors.
|
| traffic |
Optional. Displays the client-bridge related traffic
statistics The output displays TX/RX bytes, TX/RX
packets, TX/RX bits/second, and dropped
packets.
|
| on <DEVICE-OR-DOMAIN-NAME> |
Optional. Executes the command on a specified device
or devices within a specified RF Domain
- on
<DEVICE-OR-DOMAIN-NAME> – Optional. Specify
the AP, controller, service platform, or Domain
name.
|
show wireless client {association-history <MAC>} {on <DEVICE-OR-DOMAIN-NAME>}
| wireless |
Displays wireless configuration parameters |
| client |
Displays client information based on the parameters
passed |
| association-history <MAC> |
Optional. Displays association history for a
specified client
- <MAC> – Specify the MAC address of the
client.
|
| on <DEVICE-OR-DOMAIN-NAME> |
Optional. Displays association history on a
specified device or RF Domain
- <DEVICE-OR-DOMAIN-NAME> – Specify the name
of the AP, wireless controller, service platform,
or RF Domain.
|
show wireless client {detail <MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}
| wireless |
Displays wireless configuration parameters |
| client |
Displays client information based on the parameters
passed |
| detail <MAC> |
Optional. Displays detailed wireless client(s)
information
- <MAC> – Optional. Displays detailed
information for a specified wireless client.
Specify the MAC address of the client.
|
| on <DEVICE-OR-DOMAIN-NAME> |
The following keyword is recursive and common to the
‘detail <MAC>' parameter:
- on
<DEVICE-OR-DOMAIN-NAME> – Optional. Displays
detailed information on a specified device or RF
Domain
- <DEVICE-OR-DOMAIN-NAME> – Specify the
name of the AP, wireless controller, service
platform, or RF Domain.
|
show wireless client {filter ip [<IP>|not <IP>]} {on <DEVICE-OR-DOMAIN-NAME>}
| wireless |
Displays wireless configuration parameters |
| client |
Displays client information based on the parameters
passed |
| filter IP [<IP>|not <IP>] |
Optional. Uses IP addresses to filter wireless
clients
- <IP> – Selects clients with IP address
matching the <IP> parameter
- not <IP> – Inverts the match selection
|
| on <DEVICE-OR-DOMAIN-NAME> |
The following keyword is common to the ‘IP' and ‘not
IP' parameters:
- on
<DEVICE-OR-DOMAIN-NAME> – Optional. Displays
selected wireless client information on a
specified device or RF Domain
- <DEVICE-OR-DOMAIN-NAME> – Specify the
name of the AP, wireless controller, service
platform, or RF Domain.
|
show wireless client {filter} {state [data-ready|not [data-ready|roaming]|roaming]} {on <DEVICE-OR-DOMAIN-NAME>}
| wireless |
Displays wireless configuration parameters |
| client |
Displays client information based on the parameters
passed |
| filter state [data-ready| not [data-ready| roaming]|
roaming] |
Optional. Filters clients based on their state
- data-ready – Selects wireless clients in the
data-ready state
- not [data-ready|roaming] – Inverts match
selection. Selects wireless clients neither ready
nor roaming
- Roaming – Selects roaming clients
|
| on <DEVICE-OR-DOMAIN-NAME> |
The following keyword is common to the ‘ready',
‘not', and ‘roaming' parameters:
- on
<DEVICE-OR-DOMAIN-NAME> – Optional. Displays
selected client details on a specified device or
RF Domain
- <DEVICE-OR-DOMAIN-NAME> – Specify the
name of the AP, wireless controller, service
platform, or RF Domain.
|
show wireless client {filter} {wlan [<WLAN-NAME>|not <WLAN-NAME>]} {on <DEVICE-OR-DOMAIN-NAME>}
| wireless |
Displays wireless configuration parameters |
| client |
Displays client information based on the parameters
passed |
| filter wlan [<WLAN-NAME>| not
<WLAN-NAME>] |
Optional. Filters clients on a specified WLAN
- <WLAN-NAME> – Specify the WLAN name.
- not <WLAN-NAME> – Inverts the match
selection
|
| on <DEVICE-OR-DOMAIN-NAME> |
The following keyword is common to the ‘WLAN and
‘not' parameters:
-
on <DEVICE-OR-DOMAIN-NAME> – Optional.
Filters clients on a specified device or RF
Domain
- <DEVICE-OR-DOMAIN-NAME> – Specify the
name of the AP, wireless controller, service
platform, or RF Domain.
|
show wireless client {statistics} {detail <MAC>|rf|window-data <MAC>}
{(on <DEVICE-OR-DOMAIN-NAME>)}
| wireless |
Displays wireless configuration parameters |
| client |
Displays client information based on the parameters
passed |
| statistics {detail <MAC>|rf| window-data
<MAC>} |
Optional. Displays detailed client statistics. Use
additional filters to view specific details.
- detail <MAC> – Optional. Displays detailed
client statistics
- <MAC> – Optional. Displays detailed
statistics for a specified client. Specify
the client's MAC address.
- rf
– Optional. Displays detailed RF statistics on a
specified device or RF Domain
- window-data <MAC> – Optional. Displays
historical data, for a specified client
- <MAC> – Optional. Specify the
client's MAC address
|
| on <DEVICE-OR-DOMAIN-NAME> |
The following keyword is recursive and common to the
‘detail <MAC>', ‘RF', and ‘window-data
<MAC>' parameters:
- on
<DEVICE-OR-DOMAIN-NAME> – Optional. Displays
client statistics, based on the parameters passed,
on a specified device or RF Domain
- <DEVICE-OR-DOMAIN-NAME> – Specify the
name of the AP, wireless controller, service
platform, or RF Domain.
|
show wireless client {tspec} {<MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}
| wireless |
Displays wireless configuration parameters |
| client |
Displays client information based on the parameters
passed |
| tspec <MAC> |
Optional. Displays detailed TSPEC (traffic
specification) information for all clients or
a specified client
- <MAC> – Optional. Displays detailed TSPEC
information for a specified client. Specify the
MAC address of the client.
|
| on <DEVICE-OR-DOMAIN- NAME> |
The following keyword is recursive and common to the
‘tspec <MAC>' parameter:
- on
<DEVICE-OR-DOMAIN-NAME> – Optional. Displays
detailed TSPEC information for wireless clients on
a specified device or RF Domain
- <DEVICE-OR-DOMAIN-NAME> – Specify the
name of the AP, wireless controller, service
platform, or RF Domain.
|
show wireless client {include-ipv6} {detail <MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}
| wireless |
Displays wireless configuration parameters |
| client |
Displays client information based on the parameters
passed |
| include-ipv6 |
Includes IPv6 address (if known) of wireless
clients |
| detail <MAC> |
Optional. Displays detailed wireless client(s)
information
- <MAC> – Optional. Displays detailed
information for a specified wireless client.
Specify the MAC address of the client.
|
| on <DEVICE-OR-DOMAIN-NAME> |
The following keyword is recursive and common to the
‘detail <MAC>‘ parameter:
- on
<DEVICE-OR-DOMAIN-NAME> – Optional. Displays
detailed information on a specified device or RF
Domain
- <DEVICE-OR-DOMAIN-NAME> – Specify the
name of the AP, wireless controller, service
platform, or RF Domain.
|
show wireless client {include-ipv6} {filter {ip|ipv6|state|wlan}}
| wireless |
Displays wireless configuration parameters |
| client |
Displays wireless client information based on the
parameters passed |
| include-ipv6 {filter} |
Optional. Includes IPv6 address (if known) of
wireless clients
- filter – Optional. Defines additional filters.
Use one of the following options to filter
clients: ip, ipv6, state, and wlan.
By default the system only displays the IPv4
address of clients. The include-ipv6 parameter
includes the known IPv6 address of each
client.
|
| ip [<IPv4>|not <IPv4>] |
Optional. Displays wireless client information based
on the IPv4 address passed
- <IPv4> – Displays information of the client
identified by the <IPv4> parameter
- not <IPv4> – Inverts the match
selection
|
| ipv6 [<IPv6>| not <Pv6>] |
Optional. Displays wireless client information based
on the IPv6 address passed
- <IPv6> – Displays information of the client
identified by the <IPv6> parameter
- not <IPv6> – Inverts the match
selection
|
| filter state [data-ready| not [data-ready|
roaming]|roaming] |
Optional. Filters wireless client information based
on their state
- data-ready – Displays information of wireless
clients in the data-ready state
- not [data-ready|roaming] – Inverts match
selection. Displays information of wireless
clients neither ready nor roaming
- Roaming – Displays information of roaming
clients
|
| wlan [<WLAN-NAME>| not
<WLAN-NAME>] |
Optional. Displays wireless client information based
on the WLAN name passed
- <WLAN-NAME> – Specify the WLAN name.
- not <WLAN-NAME> – Inverts match
selection
|
show wireless coverage-hole-incidents {detail} {filter [ap <MAC/HOSTNAME>|
client-mac <MAC>]|summary} {(on <DOMAIN-NAME>)}
| wireless |
Displays wireless configuration parameters. Use this
option to view coverage-hole related incidents
encountered by wireless clients and reported to
associated access points. |
| coverage-hole-incidents |
Displays coverage-hole related statistics |
| detail filters [ap <MAC/HOSTNAME>| client-mac
<MAC>] |
Optional. Displays detailed coverage-hole related
statistics
- filters – Optional. Displays detailed
coverage-hole related statistics on a per access
point or wireless-client basis
- ap <MAC/HOSTNAME> – Displays detailed
coverage-hole related statistics for a
specified access point
- <MAC/HOSTNAME> – Specify the
access point‘s device name or MAC
address.
- client-mac <MAC> – Displays detailed
coverage-hole related statistics encountered
by a specified wireless client
- <MAC> – Specify the wireless
client‘s MAC address
Note: If the
command is executed without any parameters being
included, the system displays all coverage-hole
related statistics.
|
| summary |
Optional. Displays a summary of coverage-hole
related statistics |
| on <DOMAIN-NAME> |
This parameter is recursive and is common to the
‘detail‘ and ‘summary‘ keywords:
- on
<DOMAIN-NAME> – Optional. Displays detailed
or summary coverage-hole related statistics on a
specified RF Domain
- <DOMAIN-NAME> – Specify the domain
name.
|
show wireless location-server {on <AP-NAME>}
|
show wireless location-server on <AP-NAME>
|
Displays location server connection status on a
specified access point |
show wireless ml-rrm history
|
show wireless ml-rrm hsitory
|
Displays statistical data of changes made to the
radio metrics through ml-rrm. If you have enabled
ml-rrm (machine-learning radio resource management)
on your radio, use this command to view the changes
made the radio's channel, power, etc. settings
through the ml-rrm agent.
|
show wireless meshpoint {config} {filter [device <DEVICE-NAME>|rf-domain <DOMAIN-NAME>]}
| wireless |
Displays wireless configuration parameters. |
| meshpoint |
Displays meshpoint related information. Use this
option to view detailed statistics on each Mesh-capable
client available within controller‘s adopted access
point‘s radio coverage area. A mesh network is where
one where each node is able to communicate with other
nodes and maintain more then one path to the other
mesh nodes within the mesh network. A mesh network
provides robust, reliable and redundant connectivity
to all the members of the mesh network. When one
member of the mesh network becomes unavailable, the
other mesh nodes are still able to communicate with
one another either directly or indirectly through
intermediate nodes.
|
| config |
Optional. Displays all meshpoint
configuration |
| filters [device <DEVICE-NAME>| rf-domain
<DOMAIN-NAME>] |
Optional. Provides additional filter options, such
as device name and RF Domain name.
- device <DEVICE-NAME> – Displays meshpoints
applied to a specified device
- <DEVICE-NAME> – Specify the device
name
- rf-domain <DOMAIN-NAME> – Displays
meshpoints applied to a specified RF Domain
- <DOMAIN-NAME> – Specify the domain
name
|
show wireless meshpoint {detail} {<MESHPOINT-NAME>}
| wireless |
Displays wireless configuration parameters |
| meshpoint |
Displays meshpoint related information. Use this
option to view detailed statistics on each Mesh-capable
client available within controller‘s adopted access
point‘s radio coverage area. A mesh network is where
one where each node is able to communicate with other
nodes and maintain more then one path to the other
mesh nodes within the mesh network. A mesh network
provides robust, reliable and redundant connectivity
to all the members of the mesh network. When one
member of the mesh network becomes unavailable, the
other mesh nodes are still able to communicate with
one another either directly or indirectly through
intermediate nodes.
|
| detail <MESHPOINT-NAME> |
Optional. Displays detailed information for all
meshpoints or a specified meshpoint
- <MESHPOINT-NAME> – Optional. Displays
detailed information for a specified meshpoint.
Specify the meshpoint name.
|
show wireless meshpoint {multicast|path|proxy|root|security|statistics}
[<MESHPOINT-NAME>|detail] {on <DEVICE-OR-DOMAIN-NAME>}
| wireless |
Displays wireless configuration parameters |
| meshpoint |
Displays meshpoint related information. Use this
option to view detailed statistics on each Mesh-capable
client available within controller‘s adopted access
point‘s radio coverage area. A mesh network is where
one where each node is able to communicate with other
nodes and maintain more then one path to the other
mesh nodes within the mesh network. A mesh network
provides robust, reliable and redundant connectivity
to all the members of the mesh network. When one
member of the mesh network becomes unavailable, the
other mesh nodes are still able to communicate with
one another either directly or indirectly through
intermediate nodes.
|
| multicast |
Optional. Displays meshpoint multicast
information |
| path |
Optional. Displays meshpoint path
information |
| proxy |
Optional. Displays meshpoint proxy
information |
| root |
Optional. Displays meshpoint root
information |
| security |
Optional. Displays meshpoint security
information |
| statistics |
Optional. Displays meshpoint statistics |
| [<MESHPOINT-NAME>| detail] |
The following keywords are common to all of the
above parameters:
- <MESHPOINT-NAME> – Displays meshpoint
related information for a specified meshpoint.
Specify the meshpoint name.
- detail – Displays detailed multicast information
for all meshpoints
|
| on <DEVICE-OR-DOMAIN-NAME> |
The following keyword is common to all of the above
parameters:
- on
<DEVICE-OR-DOMAIN-NAME> – Optional. Displays
detailed multicast information on a specified
device or RF Domain.
- <DEVICE-OR-DOMAIN-NAME> – Specify the
name of the AP, wireless controller, service
platform, or RF Domain.
|
show wireless meshpoint {neighbor} [<MESHPOINT-NAME>|detail|statistics {rf}]
{on <DEVICE-OR-DOMAIN-NAME>}
| wireless |
Displays wireless configuration parameters |
| meshpoint |
Displays meshpoint related information. Use this
option to view detailed statistics on each Mesh-capable
client available within controller‘s adopted access
point‘s radio coverage area. A mesh network is where
one where each node is able to communicate with other
nodes and maintain more then one path to the other
mesh nodes within the mesh network. A mesh network
provides robust, reliable and redundant connectivity
to all the members of the mesh network. When one
member of the mesh network becomes unavailable, the
other mesh nodes are still able to communicate with
one another either directly or indirectly through
intermediate nodes.
|
| neighbor |
Optional. Displays meshpoint neighbor information,
based on the parameters passed |
| [<MESHPOINT-NAME>| detail|statistics
{rf}] |
Select one of the following parameter to view
neighbor related information
- <MESHPOINT-NAME> – Displays detailed
multicast information for a specified meshpoint.
Specify the meshpoint name.
- detail – Displays detailed multicast information
for all meshpoints
- statistics – Displays neighbors related
statistics
- rf – Optional. Displays RF related
statistics for neighbors
|
| on <DEVICE-OR-DOMAIN- NAME> |
The following keyword is common to all of the above
parameters:
- on
<DEVICE-OR-DOMAIN-NAME> – Optional. Displays
meshpoint neighbor information, based on the
parameters passed, on a specified device or RF
Domain.
- <DEVICE-OR-DOMAIN-NAME> – Specify the
name of the AP, wireless controller, service
platform, or RF Domain.
|
show wireless meshpoint {tree} {on <DEVICE-OR-DOMAIN- NAME>}
| wireless |
Displays wireless configuration parameters |
| meshpoint |
Displays meshpoint related information Note: The
show > wireless > meshpoint > tree
command can be executed only from a
wireless controller.
|
| tree |
Optional. Displays meshpoint network tree |
| on <DEVICE-OR-DOMAIN-NAME> |
Optional. Displays meshpoint network tree on a
specified device or RF Domain
- <DEVICE-OR-DOMAIN-NAME> – Optional. Specify
the name of AP, wireless controller, service
platform, or RF Domain
|
show wireless meshpoint {usage-mappings|on <DEVICE-OR-DOMAIN-NAME>}
| wireless |
Displays wireless configuration parameters |
| meshpoint |
Displays meshpoint related information |
| usage-mappings |
Optional. Lists all devices and profiles using the
meshpoint |
| on <DEVICE-OR-DOMAIN- NAME> |
Optional. Displays meshpoint applied to a specified
device or RF Domain
- <DEVICE-OR-DOMAIN-NAME> – Optional. Specify
the name of AP, wireless controller, service
platform, or RF Domain
|
show wireless mobility-database {on <DEVICE-OR-DOMAIN-NAME>}
| wireless |
Displays wireless configuration parameters |
| mobility-database |
Displays controller-assisted mobility
database |
| on <DEVICE-OR-DOMAIN-NAME> |
The following keyword is recursive and common to the
‘filter <RADIO-MAC>‘ parameter:
- on
<DEVICE-OR-DOMAIN-NAME> – Optional. Displays
detailed radio operation status for all or a
specified radio on a specified device or RF
Domain.
- <DEVICE-OR-DOMAIN-NAME> – Specify the
name of the AP, wireless controller, service
platform, or RF Domain.
|
show wireless mint [client|detail] {portal-candidates {<DEVICE-NAME>|filter <RADIO-MAC>}|statistics} (on <DEVICE-OR-DOMAIN-NAME>)
| wireless mint [client|detail] |
Displays radio MiNT-mesh related statistics
- client – Displays MiNT-mesh client related
information. Use the ‘client‘ option to view
detailed statistics on each Mesh capable client
available within the selected access point‘s radio
coverage area.
- detail – Displays detailed MiNT-mesh related
information
|
| portal-candidates |
Displays detailed information about portal
candidates for a MiNT-mesh. Mesh points connected to an
external network and forwarding traffic in and out are
Mesh portals. Mesh points must find paths to a portal to
access the Internet. When multiple portals exist, the
mesh point must select one. Use the additional filter
option to view specific portal candidate
details.
|
| statistics |
This option is common to the ‘client‘ and ‘detail‘
keyword. Displays MiNT-mesh client statistical
data.
|
| on <DEVICE-OR-DOMAIN-NAME> |
This option is common to the ‘client‘ and ‘detail‘
keyword.Displays MiNT-mesh client related
information on a specific device or RF Domain
- <DEVICE-OR-DOMAIN-NAME> – Specify the
access point, controller, or RF Domain
name.
|
show wireless mint portal statistics {on <DEVICE-OR-DOMAIN-NAME>}
| wireless mint |
Displays radio MiNT-mesh related statistics |
| links |
Displays MiNT-mesh links related information. MiNT
Links are automatically created between controllers and
access points during adoption using MLCP (MiNT Link
Creation Protocol). They can also be manually created
between a controller and access point (or) between
access points. MiNT links are manually created between
controllers while configuring a cluster. Level 2 (or)
remote MiNT links are controller aware links, and
requires IP network for communication. This level 2
MiNT links at access points are intended for remote
adaptive AP deployment and management from NOC. With
Level2 MiNT links, access points are only aware of
the controllers and not about other access points.
Level 2 MiNT links also provide partitioning, between
access points deployed at various remote sites.
|
| on <DEVICE-OR-DOMAIN-NAME> |
Displays MiNT-mesh links on a specific device or RF
Domain
- <DEVICE-OR-DOMAIN-NAME> – Specify the
access point, controller, or RF Domain name.
|
show wireless mint portal statistics {on <DEVICE-OR-DOMAIN-NAME>}
| wireless mint |
Displays radio MiNT-mesh related statistics |
| portal |
Displays legacy client on MiNT-mesh portal |
| on <DEVICE-OR-DOMAIN-NAME> |
Displays legacy client on MiNT-mesh portal on a
specific device or RF Domain
- <DEVICE-OR-DOMAIN-NAME> – Specify the
access point, controller, or RF Domain name.
|
show wireless radio {detail} {<DEVICE-NAME> {<1-3>|filter|on}}
| wireless |
Displays wireless configuration parameters |
| radio |
Displays radio operation status and other related
information. Use this option to view radio association
data, including radio ID, connected APs, radio type,
quality index and Signal
to Noise Ratio (SNR). This data is reported to
the managing controller or service platform from
connected access point radios and should be refreshed
periodically.A radio‘s RF Mode displays as:
- 2.4GHz-wlan – If it is configured to provide
2.4 GHz WLAN service
- 5GHz-wlan – If it is configured to provide 5.0
GHz WLAN service
- bridge – If it is configured to provide
client-bridge operation
|
| detail |
Optional. Displays detailed radio operation
status |
| <DEVICE-NAME> |
Optional. Displays detailed information for a
specified radio. Specify the MAC address or hostname, or
append the interface number to form the radio ID in the
AA-BB-CC-DD-EE-FF:RX or HOSTNAME:RX format. |
| <1-3> |
Optional. Specify the radio interface index from 1 -
3 (if not specified as part of the radio ID) |
| filter <RADIO-MAC> |
Optional. Provides additional filters
- <RADIO-MAC> – Optional. Filters based on
the radio MAC address
|
| on <DEVICE-OR-DOMAIN-NAME> |
Optional. After specifying the radio MAC address,
further refine the search by specifying a device or RF
Domain.
- <DEVICE-OR-DOMAIN-NAME> – Specify the name
of the AP, wireless controller, service platform,
or RF Domain.
|
show wireless radio {detail} {filter <RADIO-MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}
| wireless |
Displays wireless configuration parameters |
| radio |
Displays radio operation status and other related
information. Use this option to view radio association
data, including radio ID, connected APs, radio type,
quality index and SNR. This data is reported to the
managing controller or service platform from connected
access point radios and should be refreshed
periodically.A radio‘s RF Mode displays as:
- 2.4GHz-wlan – If it is configured to provide
2.4 GHz WLAN service
- 5GHz-wlan – If it is configured to provide 5.0
GHz WLAN service
- bridge – If it is configured to provide
client-bridge operation
|
| detail |
Optional. Displays detailed radio operation
status |
| filter <RADIO-MAC> |
Optional. Provides additional filter options
- <RADIO-MAC> – Uses MAC address to filter
radios
|
| on <DEVICE-OR-DOMAIN-NAME> |
The following keyword is recursive and common to the
‘filter <RADIO-MAC>' parameter:
- on
<DEVICE-OR-DOMAIN-NAME> – Optional. Displays
detailed radio operation status for all or a
specified radio on a specified device or RF
Domain.
- <DEVICE-OR-DOMAIN-NAME> – Specify the
name of the AP, wireless controller, service
platform, or RF Domain.
|
show wireless radio {statistics} {on <DEVICE-OR-DOMAIN-NAME>|rf {on <DEVICE-OR-DOMAIN-NAME>}}
| wireless |
Displays wireless configuration parameters |
| radio |
Displays radio operation status and other related
information. Use this option to view radio association
data, including radio ID, connected APs, radio type,
quality index and SNR. This data is reported to the
managing controller or service platform from connected
access point radios and should be refreshed
periodically.A radio‘s RF Mode displays as:
- 2.4GHz-wlan – If it is configured to provide
2.4 GHz WLAN service
- 5GHz-wlan – If it is configured to provide 5.0
GHz WLAN service
- bridge – If it is configured to provide
client-bridge operation
|
| statistics |
Optional. Displays radio traffic and RF
statistics |
| on <DEVICE-OR-DOMIAN- NAME> |
Optional. Displays traffic and RF related statistics
on a specified device or RF Domain
- <DEVICE-OR-DOMAIN-NAME> – Specify the name
of the AP, wireless controller, service platform,
or RF Domain.
|
| rf {on <DEVICE-OR-DOMAIN-NAME>} |
Optional. Displays RF statistics on a specified
device or RF Domain
- <DEVICE-OR-DOMAIN-NAME> – Specify the name
of the AP, wireless controller, service platform,
or RF Domain.
|
show wireless radio {statistics} {detail|window-data} {<DEVICE-NAME>} {<1-3>|filter <RADIO-MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}
| wireless |
Displays wireless configuration parameters |
| radio |
Displays radio operation status and other related
information. Use this option to view radio association
data, including radio ID, connected APs, radio type,
quality index and SNR. This data is reported to the
managing controller or service platform from connected
access point radios and should be refreshed
periodically.A radio‘s RF Mode displays as:
- 2.4GHz-wlan – If it is configured to provide
2.4 GHz WLAN service
- 5GHz-wlan – If it is configured to provide 5.0
GHz WLAN service
- bridge – If it is configured to provide
client-bridge operation
|
| statistics {detail|window-data} |
Optional. Displays radio traffic and RF statistics.
Use additional filters to view specific details. The
options are: are:
- detail – Displays detailed traffic and RF
statistics of all radios
- window-data – Displays historical data over a
time window
|
| <1-3> |
Optional. Specify the radio interface index from 1-
3, if not specified as part of the radio ID using the
preceding parameter. |
| filter <RADIO-MAC> |
Optional. Provides additional filters
- <RADIO-MAC> – Optional. Filters based on
the radio MAC address
|
| on <DEVICE-OR-DOMAIN- NAME> |
Optional. After specifying the radio MAC address,
further refine the search by specifying a device or RF
Domain.
- <DEVICE-OR-DOMAIN-NAME> – Specify the name
of the AP, wireless controller, service platform,
or RF Domain.
|
show wireless radio {tspec} {<DEVICE-NAME>|filter|on <DEVICE-OR-DOMAIN-NAME>|option}
| wireless |
Displays wireless configuration parameters |
| radio |
Displays radio operation status and other related
information. Use this option to view radio association
data, including radio ID, connected APs, radio type,
quality index and SNR. This data is reported to the
managing controller or service platform from connected
access point radios and should be refreshed
periodically.A radio‘s RF Mode displays as:
- 2.4GHz-wlan – If it is configured to provide
2.4 GHz WLAN service
- 5GHz-wlan – If it is configured to provide 5.0
GHz WLAN service
- bridge – If it is configured to provide
client-bridge operation
|
| tspec |
Optional. Displays TSPEC information on a
radio |
| <DEVICE-NAME> |
Optional. Specify the MAC address or hostname, or
append the interface number to form the radio ID in the
AA-BB-CC-DD-EE-FF:RX or HOSTNAME:RX format. |
| filter |
Optional. Provides additional filters
- <RADIO-MAC> – Optional. Filters based on
the radio MAC address
|
| on <DEVICE-OR-DOMAIN- NAME> |
Optional. After specifying the radio MAC address,
further refine the search by specifying a device or RF
Domain.
- <DEVICE-OR-DOMAIN-NAME> – Specify the name
of the AP, wireless controller, service platform,
or RF Domain.
|
show wireless regulatory [channel-info <WORD>|county-code <WORD>]
| wireless |
Displays wireless configuration parameters |
| regulatory |
Displays wireless regulatory information |
| channel-info <WORD> |
Displays channel information
- <WORD> – Specify the channel number.
|
| country-code <WORD> |
Displays country code to country name information
- <WORD> – Specify the two letter ISO-3166
country code.
|
show wireless regulatory device-type [ap505|ap510] <WORD>
| wireless |
Displays wireless configuration parameters |
| regulatory |
Displays wireless regulatory information |
| device-type <DEVICE-TYPE> <WORD> |
Displays wireless regulatory information based on
the device type selected. Select the device type. The
options are: AP505, AP510
After specifying the
device type, specify the country code.
- <WORD> – Specify the two letter ISO-3166
country code.
|
show wireless rf-domain statistics {detail} {(on <DEVICE-OR-DOMAIN-NAME>)}
| wireless |
Displays wireless configuration parameters |
| rf-domain statistics |
Displays RF Domain statistics |
| details |
Optional. Displays detailed RF Domain
statistics |
| on <DEVICE-OR-DOMAIN-NAME> |
The following keyword is recursive and common to the
‘detail‘ parameter:
- on
<DEVICE-OR-DOMAIN-NAME> – Optional. Displays
RF Domain statistics on a specified device or RF
Domain
- <DEVICE-OR-DOMAIN-NAME> – Specify the
name of the AP, wireless controller, service
platform, or RF Domain.
|
show wireless sensor-server {on <DEVICE-OR-DOMAIN-NAME>}
| wireless |
Displays wireless configuration parameters |
| sensor- server {on <DEVICE-OR-DOMAIN-
NAME>} |
Displays AirDefense sensor server configuration
details
- on
<DEVICE-OR-DOMAIN-NAME> – Optional. Displays
AirDefense sensor server configuration on a
specified device or RF Domain
|
show wireless unsanctioned aps {detailed|statistics} {(on <DEVICE-OR-DOMAIN-NAME>)}
| wireless |
Displays wireless configuration parameters |
| unsanctioned aps |
Displays unauthorized APs. Use additional filters to
view specific details. |
| detailed |
Optional. Displays detailed unauthorized APs
information |
| statistics |
Optional. Displays channel statistics |
| on <DEVICE-OR-DOMAIN- NAME> |
The following keyword is common to the ‘detailed'
and ‘statistics' parameters:
- on
<DEVICE-OR-DOMAIN-NAME> – Optional. Specify
the name of the AP, wireless controller, service
platform, or RF Domain.
- <DEVICE-OR-DOMAIN-NAME> – Specify the
name of the AP, wireless controller, service
platform, or RF Domain.
|
show wireless wips [client-blacklist|event-history] {on <DEVICE-OR-DOMAIN-NAME>}
| wireless |
Displays wireless configuration parameters |
| wips [client-blacklist|event- history] |
Displays the WIPS details
- client-blacklist – Displays blacklisted
clients
- event-history – Displays event history
|
| on <DEVICE-OR-DOMAIN-NAME> |
The following keyword is common to the
‘client-blacklist' and ‘event-history' parameters:
- on
<DEVICE-OR-DOMAIN-NAME> – Optional. Displays
the WIPS details on a specified device or RF
Domain.
- <DEVICE-OR-DOMAIN-NAME> – Specify the
name of the AP, wireless controller, service
platform, or RF Domain.
|
show wlan {detail <WLAN>|on <DEVICE-OR-DOMAIN-NAME>|policy-mappings|usage-mappings}
| wireless |
Displays wireless configuration parameters |
| wlan |
Displays WLAN related information based on the
parameters passed |
| detail <WLAN> |
Optional. Displays WLAN configuration
- <WLAN> – Specify the WLAN name.
|
| on <DEVICE-OR-DOMAIN-NAME> |
Optional. Displays WLAN configuration on a specified
device or RF Domain
- <DEVICE-OR-DOMAIN-NAME> – Specify the name
of the AP, wireless controller, service platform,
or RF Domain.
|
| policy-mappings |
Optional. Displays WLAN policy mappings |
| usage-mappings |
Optional. Lists all devices and profiles using the
WLAN |
show wlan {config filter {device <DEVICE-NAME>|rf-domain <DOMAIN-NAME>}}
| wireless |
Displays wireless configuration parameters |
| wlan |
Displays WLAN related information based on the
parameters passed |
| config filter |
Optional. Filters WLAN information based on the
device name or RF Domain |
| device <DEVICE-NAME> |
Optional. Filters WLAN information based on the
device name
- <DEVICE-NAME> – Specify the device
name.
|
| rf-domain <DOMAIN-NAME> |
Optional. Filters WLAN information based on the RF
Domain
- <DOMAIN-NAME> – Specify the RF Domain
name.
|
show wlan {detail <WLAN>|on <DEVICE-OR-DOMAIN-NAME>|policy-mappings|usage-mappings}
| wireless |
Displays wireless configuration parameters |
| wlan |
Displays WLAN related information based on the
parameters passed |
| detail <WLAN> |
Optional. Displays WLAN configuration
- <WLAN> – Specify the WLAN name.
|
| on <DEVICE-OR-DOMAIN-NAME> |
Optional. Displays WLAN configuration on a specified
device or RF Domain
- <DEVICE-OR-DOMAIN-NAME> – Specify the name
of the AP, wireless controller, service platform,
or RF Domain.
|
| policy-mappings |
Optional. Displays WLAN policy mappings |
| usage-mappings |
Optional. Lists all devices and profiles using the
WLAN |
show wlan {config filter {device <DEVICE-NAME>|rf-domain <DOMAIN-NAME>}}
| wireless |
Displays wireless configuration parameters |
| wlan |
Displays WLAN related information based on the
parameters passed |
| config filter |
Optional. Filters WLAN information based on the
device name or RF Domain |
| device <DEVICE-NAME> |
Optional. Filters WLAN information based on the
device name
- <DEVICE-NAME> – Specify the device
name.
|
| rf-domain <DOMAIN-NAME> |
Optional. Filters WLAN information based on the RF
Domain <DOMAIN-NAME> – Specify the RF Domain
name. |
show wlan {statistics {<WLAN>|detail} {(on <DEVICE-OR-DOMAIN-NAME>)}
| wireless |
Displays wireless configuration parameters |
| wlan |
Displays WLAN related information based on the
parameters passed |
| statistics {<WLAN>|detail} |
Optional. Displays WLAN statistics. Use additional
filters to view specific details
- <WLAN> – Optional. Displays WLAN
statistics. Specify the WLAN name.
- detail – Optional. Displays detailed WLAN
statistics
|
| on <DEVICE-OR-DOMAIN-NAME> |
The following keyword is common to the ‘WLAN‘ and
‘detail‘ parameters:
- on
<DEVICE-OR-DOMAIN-NAME> – Optional. Displays
WLAN statistics on a specified device or RF
Domain
- <DEVICE-OR-DOMAIN-NAME> – Specify the
name of the AP, wireless controller, service
platform, or RF Domain.
|
Examples
nx9500-6C8809(config)#show wireless wlan config
--------------------------------------------------------------------------------
NAME ENABLE SSID ENCRYPTION AUTHENTICATION VLAN BRIDGING MODE
--------------------------------------------------------------------------------
test Y test wep64 none 1 local
--------------------------------------------------------------------------------
nx9500-6C8809(config)#
nx9500-6C8809(config)#show wireless wips client-blacklist
No wireless clients blacklisted
nx9500-6C8809(config)#
nx9500-6C8809(config)#show wireless regulatory country-code
--------------------------------------------------------------------------------
ISO CODE NAME
--------------------------------------------------------------------------------
gt Guatemala
co Colombia
cn China
cm Cameroon
cl Chile
--More--
nx9500-6C8809(config)#
nx9500-6C8809#show wireless regulatory device-type ap505 us
----------------------------------------------------------------------------------------------------
# Channel Set Power(mW) Power (dBm) Placement DFS CAC(mins) TPC
----------------------------------------------------------------------------------------------------
1 1-11 4000 36 Indoor/Outdoor NA NA NA
2 36-48 4000 36 Indoor/Outdoor Not Required 0 Not Required
3 52-64 1000 30 Indoor/Outdoor Required 1 Required
4 52-64 500 27 Indoor/Outdoor Required 1 Not Required
5 100-140 1000 30 Indoor/Outdoor Required 1 Required
6 100-140 500 27 Indoor/Outdoor Required 1 Not Required
7 149-165 4000 36 Indoor/Outdoor Not Required 0 Not Required
----------------------------------------------------------------------------------------------------
nx9500-6C8809#
nx9600-7F5124#show wireless meshpoint tree on PTP-AP
In progress .......
1:PTP-Radio2 [7 MPs(2 roots, 5 bound)]
|-ap7562-84A484-ROOT1
| |-ap7562-84A2CC-VMM
| |-ap7532-80C28C-NR
| |-ap7532-82CCA4-NR
| |-ap7562-84A22C-NR2
| |-ap7532-160114
|-ap7562-84A280-ROOT2
Total number of meshes displayed: 1
nx9600-7F5124#
rfs4000-22A24E#show wireless client
-----------------------------------------------------------------------------------------------------------------
Report start on RF-Domain: qs1
MAC IP VENDOR RADIO-ID WLAN VLAN STATE
-----------------------------------------------------------------------------------------------------------------
Report end on RF-Domain: qs1
-----------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------
Report start on RF-Domain: Store-1
MAC IP VENDOR RADIO-ID WLAN VLAN STATE
-----------------------------------------------------------------------------------------------------------------
00-01-02-03-04-10 2.3.4.16 3Com Corp 00-01-02-03-04-00:R1 sim-wlan-1 1 Data-Ready
00-01-02-03-05-10 2.3.5.16 3Com Corp 00-01-02-03-04-00:R2 sim-wlan-1 1 Data-Ready
Report end on RF-Domain: Store-1
-----------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------
Report start on RF-Domain: default
database not available
Report end on RF-Domain: default
-----------------------------------------------------------------------------------------------------------------
Total number of clients displayed: 2
rfs4000-22A24E#
NX9500(config)#show wireless bridge hosts
-----------------------------------------------------------------------------
HOST MAC BRIDGE MAC IP BRIDGING STATUS ACTIVITY
(sec ago)
-----------------------------------------------------------------------------
FC-0A-81-16-75-98 FC-0A-81-16-69-50 172.16.34.55 UP 00:00:00
-----------------------------------------------------------------------------
Total number of hosts displayed: 1
NX9500(config)#
NX9500(config)#show wireless bridge statistics
---------------------------------------------------------------------------------------
LOCAL RADIO CONNECTED AP SIGNAL SNR TX-RATE RX-RATE Tx Rx RETRY
(dbm) db (Mbps) (Mbps) bps bps AVG
---------------------------------------------------------------------------------------
ap6562-167598:R2 B4-C7-99-CA-A1-F0 -52 50 53 36 1 k 3 k 10
---------------------------------------------------------------------------------------
Total number of radios displayed: 1
NX9500(config)#
The following example shows the location-server status as
online:
vx9000-739FF8#show wireless location-server on ap7532-1600B0
--------------------------------------------------------------------------------
# LOCATION SERVER HOST PORT STATUS
--------------------------------------------------------------------------------
1 testws.extremelocation.com 443 ONLINE
--------------------------------------------------------------------------------
vx9000-739FF8#
If the location-server IP address/hostname is not configured in the
AP's RF-Domain, then the status displays as "no server defined" as
shown in the following example:
vx9000-739FF8(config)#show wireless location-server on ap7612-3B363D
--------------------------------------------------------------------------------
# LOCATION SERVER HOST PORT STATUS
--------------------------------------------------------------------------------
1 0 no server defined
--------------------------------------------------------------------------------
vx9000-739FF8(config)#
The following example displays ml-rrm driven radio metric
changes:
ap7632-9AECE1#show wireless ml-rrm history
--------------------------------------------------------------------------------------------------------------------------------
TIME EVENT DESCRIPTION
--------------------------------------------------------------------------------------------------------------------------------
Thu Feb 28 20:03:43 2019 Mangement Rate Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) mgmt rate is set to 30
Thu Feb 28 20:03:43 2019 Probe Response Threshold Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) probe is set to -20
Thu Feb 28 20:03:43 2019 Cell Size Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) cell size is set to -10
Thu Feb 28 20:03:43 2019 Mangement Rate Radio ap7632-9AECE1:R1 (D8-84-66-9A-DA-00) mgmt rate is set to 30
Thu Feb 28 20:03:43 2019 Probe Response Threshold Radio ap7632-9AECE1:R1 (D8-84-66-9A-DA-00) probe is set to -20
Thu Feb 28 20:03:43 2019 Cell Size Radio ap7632-9AECE1:R1 (D8-84-66-9A-DA-00) cell size is set to -10
Thu Feb 28 20:02:02 2019 Mangement Rate Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) mgmt rate is set to 30
Thu Feb 28 20:02:02 2019 Probe Response Threshold Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) probe is set to -20
Thu Feb 28 20:02:02 2019 Cell Size Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) cell size is set to -10
Thu Feb 28 20:02:02 2019 Mangement Rate Radio ap7632-9AECE1:R1 (D8-84-66-9A-DA-00) mgmt rate is set to 30
Thu Feb 28 20:02:02 2019 Probe Response Threshold Radio ap7632-9AECE1:R1 (D8-84-66-9A-DA-00) probe is set to -20
Thu Feb 28 20:02:02 2019 Cell Size Radio ap7632-9AECE1:R1 (D8-84-66-9A-DA-00) cell size is set to -10
Thu Feb 28 20:01:57 2019 Channel Change Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) channel changed from 36 to 52w
Thu Feb 28 20:01:57 2019 Power Adjustment Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) power changed from 20 to 12
Thu Feb 28 20:01:57 2019 Mangement Rate Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) mgmt rate is set to 30
Thu Feb 28 20:01:57 2019 Probe Response Threshold Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) probe is set to -20
Thu Feb 28 20:01:57 2019 Cell Size Radio ap7632-9AECE1:R2 (D8-84-66-9A-DA-10) cell size is set to -10
Thu Feb 28 20:01:52 2019 Channel Change Radio ap7632-9AECE1:R1 (D8-84-66-9A-DA-00) channel changed from 1 to 6w
Thu Feb 28 20:01:52 2019 Power Adjustment Radio ap7632-9AECE1:R1 (D8-84-66-9A-DA-00) power changed from 23 to 18
Thu Feb 28 20:01:52 2019 Mangement Rate Radio ap7632-9AECE1:R1 (D8-84-66-9A-DA-00) mgmt rate is set to 30
--------------------------------------------------------------------------------------------------------------------------------
ap7632-9AECE1#
